Guide to Mixer Grinder Spare Parts and How to Replace Them

A mixer grinder is one of the most hard-working appliances in your kitchen. But over time, its parts can wear out due to constant use. Instead of replacing the entire appliance, you can swap out specific spare parts to extend its life and restore efficiency.

In this guide, we’ll explore common mixer grinder spare parts, why they matter, and detailed steps on how to replace them.

Why Replace Spare Parts?

Mixer grinders rely on several components working together seamlessly. When even one part fails, it affects the entire appliance. Replacing individual parts saves money, reduces waste, and keeps your mixer grinder performing like new.

Detailed Guide to Key Mixer Grinder Spare Parts and How to Replace Them

Coupler Replacement

The coupler connects the jar to the motor. The coupler might be worn out if the jar doesn’t spin or makes strange noises.

Tools Needed:

• A cloth for grip
• Replacement coupler

Step-by-Step Process:

1. Unplug the appliance to ensure safety.
2. Flip the mixer grinder upside down to access the coupler.
3. Hold the coupler firmly using a cloth for better grip.
4. Turn the coupler anticlockwise to unscrew it from the motor shaft.
5. Align the new coupler on the motor shaft.
6. Screw the new coupler clockwise until it’s snug. Avoid over-tightening.
7. Test the appliance by attaching a jar and running it quickly to check smooth operation.

Blade Replacement

Blades wear out over time, affecting grinding and blending consistency.

Tools Needed:

• Pliers or a wrench
• Replacement blade

Step-by-Step Process:

1. Detach the jar from the mixer grinder and empty it.
2. Turn the jar upside down to access the blade assembly at its base.
3. Use pliers or a wrench to hold the blade securely.
4. Unscrew the blade assembly anticlockwise to remove it.
5. Clean the jar and its base thoroughly.
6. Insert the new blade assembly into the base.
7. Tighten the blade assembly clockwise until secure.
8. Fill the jar with water and test it to ensure no leaks or issues.

Jar and Lid Replacement

Cracked jars or loose lids can lead to leaks and messy spills.

Tools Needed:

• Replacement jar or lid (ensure compatibility with your mixer grinder model)

Step-by-Step Process:

1. Remove the damaged jar or lid from the appliance.
2. If the gasket (rubber ring) on the old lid is still in good condition, transfer it to the new lid.
3. Attach the replacement jar or lid to the appliance.
4. Test the jar by filling it with water and running it quickly to check for leaks.

Gasket (Rubber Ring) Replacement

The gasket ensures a tight seal between the jar and lid, preventing leaks. Over time, it can wear out or loosen.

Tools Needed:

• Replacement gasket

Step-by-Step Process:

1. Remove the lid from the jar.
2. Pull out the old gasket from the lid’s groove. Use your fingers or a flat tool if it’s stuck.
3. Clean the groove thoroughly to remove any reuins or buildup.
4. Fit the new gasket into the groove, ensuring it sits evenly and snugly.
5. Place the lid back on the jar and test it by blending a small amount of liquid to ensure no leaks occur.

Motor Brush Replacement

The motor brushes transfer electrical current to the motor, enabling it to function. Replacing the brushes may solve the issue if your mixer grinder isn’t starting or feels weak.

Tools Needed:

• Screwdriver
• Replacement motor brushes

Step-by-Step Process:

1. Unplug the appliance for safety.
2. Locate the motor brush compartments on the sides or bottom of the motor housing.
3. Use a screwdriver to open the compartment covers.
4. Carefully remove the old brushes from their slots. Note their orientation.
5. Insert the new brushes into the slots in the same orientation.
6. Close the compartment covers securely.
7. Plug in the appliance and test its performance.

Speed Knob or Switch Replacement

A damaged speed knob or unresponsive switch can make your mixer grinder difficult to use.

Tools Needed:

• Screwdriver
• Replacement speed knob or switch

Step-by-Step Process:

1. Unplug the mixer grinder and unscrew the control panel cover.
2. Locate the faulty knob or switch and disconnect the wires attached to it.
3. Remove the old knob or switch carefully.
4. Install the new knob or switch, reconnecting the wires to their original positions.
5. Screw the control panel cover back in place.
6. Plug in the appliance and test the knob or switch to ensure it functions properly.

Base Pad Replacement

Worn-out base pads can make the appliance unstable during use.

Tools Needed:

• Replacement base pads

Step-by-Step Process:

1. Turn the appliance upside down to locate the base pads.
2. Remove the old pads by pulling them off or unscrewing them, depending on the design.
3. Align the new pads with the slots and press them firmly into place or screw them in.
4. Test the stability of the appliance by running it on a flat surface.

Safety Tips for Spare Part Replacement

• Always unplug the appliance before repairing the mixer grinder.
• Use genuine spare parts for better compatibility and performance.
• Handle sharp components like blades carefully to avoid injury.
• Refer to your appliance’s user manual for model-specific instructions.

Where to Buy Mixer Grinder Spare Parts

You can find high-quality spare parts at:

1. Authorised Service Centres: For genuine parts with a warranty.
2. Online Platforms: Websites like Amazon https://amzn.to/3BYek8g
3. Local Appliance Shops: A quick solution for common spare parts.

Conclusion

Maintaining your mixer grinder is easy when you understand its spare parts and how to replace them. Replacing these components can save money and keep your appliance running smoothly for years, whether it’s a worn-out coupler, dull blades, or a leaky gasket. If you want to buy a new mixer, you can check this top 10 list of mixer grinders.

Don’t let minor issues slow you down in the kitchen—start replacing those spare parts today!